11. Orient the Seat (9) as shown. Attach the Seat to
the Seat Carriage (6) with four 1/4" x 38ram
Patch Screws (61) and four M6 Washers (63).
Note: The Patch Screws and the Washers
may be preattached to the underside of the
Seat.
61 61
12
12. Attach the Pulse Bar Cover (15) to the Seat
Carriage (6) with two M4 x 16ram Screws (62).
/
62
15
1
11
To Next Page
Loading...
