3. Installation
3.1. What's in the box?
BMV-712 Smart head unit together with
attachment sleeve
.
500A shunt.
Two 1.5m (59") red cables with a 1A fuse.
10m (33ft) RJ12 UTP cable.
Square face plate together with an attachment
flange.
Bag with 4 small screws.
Quick installation guide.
Spare serial number sticker.
3.2. Mounting the shunt
The shunt has an IP21 rating; this means that the shunt is not waterproof and has to be mounted in a dry location.
The shunt has two 5.5 mm holes for mounting purposes; these are located in the base of the shunt. The holes can be used to
screw or bolt the shunt onto a hard surface (note that these screws are not included).
Manual - BMV-712 Smart
Page 4 Installation
To Next Page
Loading...