Example of a system containing a battery monitor with a temperature sensor and a solar charger, both using the VE.Smart
networking.
6.4. Custom integration
Please note that this is an advanced feature and requires programming knowledge.
The VE.Direct communications port can be used to read data and change settings. The VE.Direct protocol is extremely simple
to implement. T
ransmitting data to the battery monitor is not necessary for simple applications: the battery monitor automatically
sends all readings every second.
All the details are explained in the Data communication with Victron Energy products document.
Manual - BMV-712 Smart
Page 27 Interfacing
To Next Page
Loading...