Progress Solar/Wind SLT 700 Series - Scroll Speed; Main Voltage Display; Current Display; Power Display

Setting Default Modes
Backlight always on (setting 50) OFF
ON
OFF
7.5.3. Scroll speed
The scroll speed of the display
. This setting ranges from 1 (very slow) to 5 (very fast).
Setting Default Range Step size
Scroll speed (setting 51) 2 1 - 5 1
7.5.4. Main voltage display
Must be set to ON to display the voltage of the main battery in the monitoring menu.
Setting Default Modes
Main voltage display (setting 52) ON
ON
OFF
7.5.5. Current display
Must be set to ON to display the current in the monitoring menu.
Setting Default Modes
Current display (setting 53) ON
ON
OFF
7.5.6. Power display
Must be set to ON to display the power measurement in the monitoring menu.
Setting Default Modes
Power display (setting 54) ON
ON
OFF
7.5.7. Consumed Ah display
Must be set to ON to display the consumed Ah in the monitoring menu.
Setting Default Modes
Consumed Ah display (setting 55) ON
ON
OFF
7.5.8. State of charge display
Must be set to ON to display the battery state of charge in the monitoring menu.
Setting Default Range Step size
State of charge display (setting 56) 5 1 - 5 1
7.5.9. Time-to-go display
Must be set to ON to display the state of charge in the monitoring menu.
Setting Default Modes
Time-to-go display (setting 57) ON
ON
OFF
Manual - BMV-712 Smart
Page 37 All features and settings