Proline EXP1050 - Adjusting Brewing Time; Automatic Shut Off Feature

58
You can also change the brewing time up to about 44s.
a. Press and hold for about 3 seconds.
• The indicator light on the button will illuminate and the pump
starts timing your shots. Then the indicator light will ash.
b. When the desired brewing time is reached, press again to conrm
the setting.
c. Wait for the ON/OFF indicator light to stop ashing and then press
to start brewing. When the set brewing time has elapsed, the appliance
will stop the brewing cycle.
d. To cancel the brewing time setting, unplug the appliance and wait for a
while before plugging in.
• To brew a double shot, press . Espresso will begin to ow into
the cup or cups. After about 40s, the appliance will automatically stop
working.
You can also change the brewing time up to about 84s.
a. Press and hold for about 3 seconds.
• The indicator light on the button will illuminate and the pump
starts timing your shots. Then the indicator light will ash.
b. When the desired brewing time is reached, press again to
conrm the setting.
c. Wait for the ON/OFF indicator light to stop ashing and then press
to start brewing. When the set brewing time has elapsed, the
appliance will stop the brewing cycle.
d. To cancel the brewing time setting, unplug the appliance and wait for a
while before plugging in.
• To customize the brewing to your preference, press . Espresso will
begin to ow into the cup or cups.
When the desired amount of coee has been brewed, press again
to stop the brewing process.
AUTOMATIC SHUT OFF
In order to save energy, the appliance will automatically turn o when it has not
been used for about 30 minutes.
EXP1050 IB 2022.indd 58 28/2/2022 9:09 AM