58 ActivPanel User Guide
The Tablet list displays an icon for any supported pen display or tablet that has been detected on your
system, and allows you to select the pen display or tablet for which your changes will apply.
Select a pen display or tablet icon
for which to customize pen and
application settings.
•
The control panel will not
launch unless a supported pen
display or tablet is connected
to the computer.
•
Settings can only be viewed or
changed for an attached pen
display or tablet.
To add a new pen display or tablet, connect it to your computer. For USB products, the system searches
the USB ports. When the new pen display or tablet is found, it is automatically initialized.
Important:
When installing additional pen displays or tablets on Windows systems, please note that the eraser
function may not work in some applications when using the additional pen display(s) or tablet(s). The
eraser function will continue to work correctly using the first unit that was added to the control panel.
To remove one of multiple tablets from the driver, in the ActivPanel Tablet control panel select the pen
display or tablet icon to be deleted and click on the [ – ] button next to the Tablet list.
•
A pen display or tablet cannot be deleted from the control panel list unless it is attached to the computer.
•
Note that you will need to restart your computer before you can again add the pen display or tablet to
the driver.