ActivPanel User Guide 29
With your screen cursor positioned over an empty area of the control panel, press down on the
pen display screen with your pen tip to test the current tip feel setting. Use the Current Pressure
bar to determine how hard you must press on the pen to reach maximum pressure.
Customizing
Customizing your pen is easy. First open the ActivPanel Tablet control panel using the pen. The pen will
be selected in the Tool list and the appropriate tabs will be displayed. Select a tab and choose from the
available options.
•
Adjusting tip feel and double-click
•
Adjusting eraser feel
•
Advanced tip and eraser pressure settings
•
Customizing pen buttons
•
Application-specific settings
Adjusting Tip Feel and Double-Click
To adjust the tip sensitivity of your pen, select the Pen tab.
Tips:
Use a soft tip feel for a wider range of pressure values with most pressure-sensitive applications. In some
applications a soft pressure setting can make the pen overreact – any small press on the pen is magnified on
the screen. If you experience this, try a firmer tip feel setting.
To make double-clicking easier, expand the tap area that accepts a double-click (the double-click distance).
A large double-click distance may cause a delay at the beginning of brush strokes in some graphics
applications. If you notice such effects, try setting a smaller double-click distance and using the side switch
to double-click.
Adjusts the size of the
double-click area. A
larger setting makes
doubleclicking easier.
Drag the slider to Off
if you do not want
double-click assist.
Customizes the amount of pressure needed to click or draw.
To create broad brush strokes or to click with a light touch,
use a Soft tip setting. For maximum control while sketching
thin lines, use a Firm tip setting.
Displays the tip Feel
Details dialog box where
you can further customize
the tip sensitivity.
To Next Page
Loading...
Need help?
General
