promethean ClassFlow Connect - Configuring Your Network; Software Updates

Congure
Conguringyournetwork
ClassFlowConnectallowsdualsimultaneousnetwork
connections. In Networks you can enable and disable each
networkadapter.
IMPORTANT NOTE: To wirelessly mirror via Miracast or Intel WiFi,
the wireless adapter must be enabled. Better performance
isachievedifthewirelessadapterisafliatedtoawireless
network.Ifyouchoosetoconnectyourdevicetoawired
network,makesurethatyouDONOTdisablewireless.
You may simply leave wireless enabled but disconnected from
anetwork.
Ifyouarehavingtroublendingyourwirelessnetworkinthelist
thentryusingthe“RefreshNetworkList”button.Youmayhave
anetworkwhichisnotbroadcastingaSSIDandyouwillneed
tosetupaproleconsistentwithyournetwork.Yournetwork
administrator may need to assist in these special cases.
IMPORTANT NOTE: IP Multicast MUST be enabled for your
ClassFlowConnectdevicetoworkwithAppleandWindows
7/8 laptops, smartphones and tablets. If you do not see the
ClassFlowConnectdeviceonyournetworkwhentryingto
mirror,yournetworkadministratormayhavedisabledthis
feature.Pleasecontactyournetworkadministratortoverify
that IP Multicast is enabled on your subnet and that all devices
youarelookingtomirrorareonatleastoneofthetwonetwork
subnetsyourClassFlowConnectdeviceisafliatedwith.
Software updates
Your ClassFlow Connect has a future ready design. You can
checkforandinstallupdatesthroughtheSoftware Update
option in Settings.
14 ClassFlow Connect Installation & User Guide