promethean ClassFlow Connect - Configure; Configuring Your Device

Connect
Step 6: Turn on your equipment
1. Turn on your display and/or projector and ensure the correct
inputisselected.YourClassFlowConnectreadsthesize
ofyourdisplayduringitsrststartup,soyoushouldalways
have your display on the correct source before starting your
ClassFlowConnectforthersttime.
2.Press the power button on your ClassFlow Connect device.
ThersttimeyouuseClassFlowConnectyouwillbeasked
to digitally sign the End User License Agreement. This can be
simply selected on the interactive display or you can use a
keyboardandmousetoassist.
NOTE: Neverforceaconnectorintoaport.Checkfor
obstructionsontheport.Alwaysmakesuretheconnector
matches the port and that you have positioned the connector
correctly in relation to the port.
Congure
Conguringyourdevice
TocongureyourClassFlowConnectyoumusthavethe
administrator password for your device.
DEFAULT PASSWORD: admin
Select for the menu, then select Settings and enter the
administrator password.
12 ClassFlow Connect Installation & User Guide