ProMinent Dulcodes M - Fault Message: Memory Fault; Fault Message: Standard Settings; Fault Indication: Signal < 4 mA

ProMinent
®
Page 39
Fault message: memory fault
Cause The control system detected a fault in the memory.
Remedy
Replace the control system (skilled electricians only)
Fault message: standard settings
Cause The control system detected a fault in the memory.
Remedy Replace the control system (skilled electricians only)
Fault indication: signal < 4 mA
Cause Input signal in external control setting 4-20 mA is < 4 mA
Remedy
check signal cable, check control signal
Störung
Signal < 4 mA
Troubleshooting
Fault
standard settings
Fault
Memory fault