11 User Manual
Connect to Wi-Fi Overview
At minimumm the first 3 tasks below must be completed to access your thermostat remotely
from a browser.
The 4th step is optional (highly recommended) and only is needed to access your thermostat(s)
from a mobile device.
These steps are:
1. Successful connection to a local Wi-Fi Access Point with internet access.
2. Confirm receipt of a ProStat+ generated verification email (this only occurs once during the
ProStat+ Web Portal account setup).
3. A 6-digit code obtained from the thermostat is successfully entered into a ProStat+ Web
Portal account.
4. Successfully download and install the ProStat+ app on your mobile device(s).
Your thermostat operates on the 2.4 Ghz, Wi-Fi b/g/n band.
Wi-Fi Symbol Legend
When the only the ‘dot’ of the Wi-Fi symbol appears = not connected to an access point.
When the full Wi-Fi symbol appears = connected to an access point.
When the full Wi-Fi symbol appears and the ‘dot’ of the symbol is flashing = connected
to ProStat+ Web Portal.
To Next Page
Loading...
