12
User Manual
Wi-Fi Setup
The ProStat+ Configurator App is needed to configure the Wi-Fi Settings of this thermostat
• Download the ProStat+ Configurator App
from your mobile device’s App Store.
• Open the ProStat+ Configurator App
- Choose the ProStat+ Mini thermostat picture.
- Press and hold the FAN button of the thermostat for approximately 5 seconds to enter
Wi-Fi setup screens.
- Press the cooler button to setup Wi-Fi.
- Follow the instructions that appear on the ProStat+ Configurator App.
Connect to ProStat+ Web Portal
Although there is more than one way to create an account, the steps below illustrate account
creation from a browser.
To create an account a thermostat must be joined to the account.
If the thermostat is connected to the local Wi-Fi Access Point, but you do not have an account,
you may create an account and join the thermostat to the account by doing the following:
1. Open your browser to: http://prostat.skyportcloud.com
2. Select “Create account now”
3. Follow on screen instructions to create an account and add a thermostat to
the ProStat+ account.
Create Account Now
To Next Page
Loading...