17 User Manual
Programming a Daily Schedule
Programming a Daily Schedule - To enter Time Period Programming screens, press and hold
MODE and UP until the scrolling prompt appears.
Select Day of Week to program - Press the WARMER or COOLER buttons to choose the day of
the week. Press MODE to advance to the next step.
This thermostat features four programmable time periods per 24 hour day: Morning, Day, Evening,
and Night. The start time for each time period is adjustable. The stop time for each time period is
the start time for the next period. Each time period may be individually disabled.
Select the Day to Program - Press the WARMER or COOLER buttons to select the desired
Day of the Week.
Enable/Disable Morning Period - Press the WARMER or COOLER buttons to select ON or OFF. If
ON is selected, then the Morning period will run with the Mode and Setpoints selected. If OFF is
selected then the Morning time period will be skipped and the thermostat will use the next time
period that is enabled.
Select Morning Mode - Press the WARMER or COOLER buttons to adjust the moring time period
start time.
Select Morning Start Time - Press the WARMER or COOLER buttons to adjust the time of day
desired. Press MODE to advance to the next step.
Select Morning Cool Setpoint - Press the WARMER or COOLER buttons to adjust the cool
setpoint desired. This step will appear if Cool or Auto Mode was selected in the step where the
Morning mode is specified. Press MODE to advance to the next step.
Select Morning Heat Setpoint - Press the WARMER or COOLER buttons to adjust the heat
setpoint desired. This step will appear if Heat or Auto Mode was selected in the step where the
Morning mode is specified. Press MODE to advance to the next step.
Repeat previous steps for Day, Evening, and Night programming.
To Next Page
Loading...
