protech SE-8134 - Flash BIOS Update

Appendix B Technical Summary
SE-8134 SERIES USER MANUAL
Page: B-25
Flash BIOS Update
I. Prerequisites
1 Prepare a bootable media (e.g. USB storage device) which can
boot system to DOS prompt.
2 Download and save the BIOS file (e.g. 81340PM1.bin) to the
bootable device.
3 Copy AMI flash utility –AFUEFIx64.exe (v5.09.01) into
bootable device.
4 Make sure the target system can first boot to the bootable device.
(1) Connect the bootable USB device.
(2) Turn on the computer and press <ESC> or <DEL> during
boot to enter BIOS Setup.
(3) The system will go into the BIOS setup menu.
(4) Select [Boot] menu.
(5) Select [UEFI: Built-in EFI Shell] as the 1
st
boot device.
(6) Press F4 to save the configuration and exit the BIOS setup
menu.