Chapter 5 BIOS Setup
SE-8134 SERIES USER MANUAL
5.8 Save & Exit
Menu Path Save & Exit
The Save & Exit allows users to save or discard changed BIOS settings as well as
load factory default settings.
Save Changed BIOS Settings
To save and validate the changed BIOS settings, select Save Changes from the Save
& Exit menu, or you can select Save Changes and Exit (or press F4) to validate the
changes and then exit the system. Select Save Changes and Reset to validate the
changed BIOS settings and then restart the system
Discard Changed BIOS Settings
To cancel the BIOS settings you have previously configured, select Discard Changes
and Exit from this menu, or simply press Esc to exit the BIOS setup. You can also
select Discard Changes and Reset to discard any changes you have made and restore
the factory BIOS defaults.
Load User Defaults
You may simply press F3 at any time to load the Optimized Values which resets all
BIOS settings to the factory defaults.
Save & Exit Screen
To Next Page
Loading...
