Chapter 4 Software Utilities
SE-8134 SERIES USER MANUAL
4.8 Installing Intel
®
Serial I/O Driver Utility
To install the Serial I/O Driver, follow the steps below:
1 Connect the USB DVD-ROM device to SE-8134 and insert the
driver disk.
2 Open the Serial I/O folder where the driver is located.
3 Select Windows 10 (64-bit) for your OS platform.
4 Click the SetupSerialIO.exe file for driver installation.
5 Follow the on-screen instructions to complete the installation.
6 Once the installation is completed, shut down the system and
restart SE-8134 for the changes to take effects.
To Next Page
Loading...
