Chapter 4 Software Utilities
SE-8134 SERIES USER MANUAL
4.5 Installing Graphics Driver Utility
The GRAPHICS interface embedded in SE-8134 can support a wide
range of display types. You can have dual displays via LVDS
interfaces and make the system work simultaneously.
To install the Graphics driver utility, follow the steps below:
1 Connect the USB DVD-ROM device to SE-8134 and insert the
driver disk.
2 Enter the Graphics folder where the driver is located
(e.g.: \ GFX_64bits_15.45.14.64.4590 \ Setup.exe).
3 Click the Setup.exe file for driver installation.
4 Follow the on-screen instructions to complete the installation.
5 Once the installation is completed, shut down the system and
restart SE-8134 for the changes to take effects.
To Next Page
Loading...
