Notices
© The Protectowire
Company, Inc.
No part of this manual may be repro-
duced in any form or by any means
(including electronic storage and
retrieval or translation into a foreign
language) without prior agreement
and written consent from The
Protectowire Company, Inc. as
governed by US and international
copyright laws.
Warranty
This The Protectowire Company, Inc.
instrument product is warranted
against defects in material and
workmanship for a period of one
year from date of shipment. During
the warranty period, The Protectowire
Company, Inc. will, at its option,
either repair or replace products that
prove to be defective.
For warranty service or repair, this
product must be returned to a service
facility designated by The
Protectowire Company, Inc.. Buyer
shall prepay shipping charges to
The Protectowire Company, Inc. and
The Protectowire Company, Inc.
shall pay shipping charges to
return the product to Buyer.
However, Buyer shall pay all
shipping charges, duties, and taxes
for products returned to The
Protectowire Company, Inc. from
another country.
The Protectowire Company, Inc.
warrants that its software and
firmware designated by Protectowire.
for use with an instrument will exe-
cute its programming instructions
when properly installed on that instru-
ment. The Protectowire Company,
Inc. does not warrant
that the
operation of the instrument,
software, or firmware will be uninter-
rupted or error free.
Assistance
Product maintenance agreements
and other customer assistance agree-
ments are available for The
Protectowire Company, Inc.
products. For any assistance contact
The Protectowire Company, Inc..
Certification
The Protectowire Company, Inc.
certifies that this product met its
published specifications at the time
of shipment from the factory.
The Protectowire Company, Inc.
further certifies that its calibration
measurements are traceable to the
United States National Institute of
Standards and Technology,
NIST
(formerly the United States
National Bureau of Standards, NBS)
to the extent allowed by the Insti-
tutes’s calibration facility, and to the
calibration facilities of other Interna-
tional Standards Organization mem-
bers.
Subject Matter
The material in this document is sub-
ject to change without notice.
The Protectowire Company, Inc.
makes no warranty of any kind with
regard to this printed material,
including, but not limited to, the
implied warranties of merchantability
and fitness for a particular purpose.
The Protectowire Company, Inc.
shall not be liable for
errors
contained herein or for incidental or
consequential damages in con-
nection w i th the furnishing,
performance, or use of this material.
ISO 9001 Certification
Produced to ISO 9001 international
quality system standard as part of our
objective of continually increasing
customer satisfaction through
improved process control.
Limitation of Warranty
The foregoing warranty shall not apply
to defects resulting from improper or
inadequate maintenance by Buyer,
Buyer-supplied software or interfac-
ing, unauthorized modification or mis-
use, operation outside of the
environmental specifications for the
product, or improper site preparation
or maintenance.
No other warranty is expressed or
implied. The Protectowire Company,
Inc. specifically disclaims the implied
warranties of merchant ability an d
Fitness for a particular purpose.
Printing History
New editions are complete revisions
of the guide reflecting alterations in
the functionality of the instrument.
Updates are occasionally made to the
guide between editions. The date on
the back page changes when an
updated guide is published. To find
out the current revision of the guide,
or to purchase an updated guide, con-
tact Protectowire Company, Inc.
representative.
Exclusive Remedies
The remedies provided herein are
Buyer’s sole and exclusive remedies.
The Protectowire Company, Inc. shall
not be liable for any direct, indirect,
special, incidental, or consequential
damages whether based on
contract, tort, or any other legal
theory.
To Next Page
Loading...
Need help?
General