Protectowire FiberSystem 8000 User Manual

Specifications and Regulatory Information
Minimum sampling interval
Specifies the minimum spatial distance of two consecutive result
points in the measured temperature profile (see figure under
Spatial Resolution).
Operating temperature and humidity range
Environmental temperature range and humidity range of the
FIBERSYSTEM 8000 unit for which the specifications apply.
Conditions: All
specifications
apply for environmental
temperature change max. +− 20°C per hour.
Note: For a FIBERSYSTEM 8000 unit mounted in a rack
the environmental conditions within the rack apply.
Note:
For the temperature range of the sensing fiber see
Sensing fiber temperature range.
Optical interface
Nominal properties of the optical port (sensor port) of the
FIBERSYSTEM 8000 unit.
Reference sensing fiber
Fiber type as specified. Conditions: Fiber without contusions,
sharp bends, splices and connectors (if not differently stated) that
affect the light transmission.
Sensing fiber temperature range
Specifies the measurable temperature range for which the
FIBERSYSTEM 8000 unit is designed.
Note: The actual temperature range of a sensing fiber depends
on the sensing fiber type (e.g. coating).
The Protectowire Company, Inc.
FIBERSYSTEM 8000 - Linear Heat
Series
40

Protectowire FiberSystem 8000 Specifications

General

Brand	Protectowire
Model	FiberSystem 8000
Category	Controller
Language	English