AIR/NITROGEN
AIR / NITROGEN TANK OPTIONS AND INSTALLATION
The REFLEX RAIL™ will only work with Compressed air
or Nitrogen air systems such as the DYE Throttle
®
air
system. Do not use CO
2
or any other compressed
gas. The output pressure from the air system has
to be between 400 – 850psi.
To install an air system, screw the tank into
the airport all the way as far as it will go. To
remove the air system screw out. There will
be gas leaking for a few seconds while you
screw the air system out. Notice that even
with the air system removed there can
be gas inside the REFLEX RAIL™ and it
can still fi re a paintball. Always treat
the marker as being live and never
point it to anything you don’t intend
to shoot at!
W W W . P R O T O P A I N T B A L L . C O M
19
To Next Page
Loading...
