1 Clamping Feed Collar
2 Feed Neck Lever
3 Feed Neck
4 Ball Detent
5 Eye Pipe
6 Hyper3™
7 “ACE” Eye
8 Solenoid
9 Front Frame Screw
10 Ultralite Frame
11 Rear Frame Screw
12 REFLEX RAIL™ Bolt
13 REFLEX RAIL™ Body
14 Airport
15 Solenoid screws
PARTS LIST
WARRANTY
DYE Precision, Inc. warrants for one year to the initial retail purchaser, from the initial date of
purchase, that the paintball marker and regulator are free from defects in materials and workmanship,
subject to the requirements, disclaimers and limitations of this warranty. Disposable parts, normal
maintenance and standard wear and tear parts such as batteries, O-rings and seals are not covered
under warranty. The solenoid and electronic components on the marker are covered under warranty
for six months. This warranty does not cover scratches, nicks, improper disassembly, improper re-
assembly, misuse, neglect or improper storage. Modifi cation to the product will void the warranty.
The only authorized lubricant for the marker is Slick Lube™. Use of any other lubricant will void your
warranty. This warranty is limited to repair or replacement of defective parts with the customer to
pay shipping costs. Warranty card and proof of purchase must be submitted to DYE Precision for
warranty to be in effect. This warranty is not transferable. This warranty does not cover performance.
Paintball markers are non-refundable.
TECHNICAL SUPPORT
Our Technical Support Departments are open Monday through Friday.
DYE Precision, Inc. can be reached at 858-536-5183 ext.277 from 9am to 5pm PST.
DYE Europe can be reached at +44 (0) 20-8649-6330 from 9am to 5pm GMT.
DYE Asia can be reached at 886 (0) 4-2407-9135 from 9am to 5pm GMT +8 hours.
Additional support and international contacts are available through our web site, www.dyepaintball.com.
DISCLAIMER
The specifi cations & photographs in this material are for information and general guidance purposes
only. Our products are continually updated and changes may be made to specifi cation, design or
appearance from time to time. These are subject to change without notice. Contents of box may
therefore vary from owner’s manual. For details of changes in design, specifi cation or appearance
consult your local distributor or dealer. The FUSE™ BOLT, REFLEX RAIL™, Hyper3™ and Slick Lube™
are registered trademarks. Design rights, copyrights and all other rights reserved.
All patterns, drawings, photographs, instructions or manuals remain the intellectual property of the
manufacturer.
DYE Precision, Inc. U.S. Patent # 5,613,483. OTHER U.S. AND INT’L PATENTS PENDING. Covered by
one or more of the following U.S. Patents, 5,613,483; 5,881,707; 5,967,133; 6,035,843 and 6,474,326.
DYE Precision, Inc.
10637 Scripps Summit Ct.
San Diego, CA. 92131
DYE Europe
Dye House,
7-8 Commerce Way
Croydon, Surrey
United Kingdom CR0 4XA
DYE Germany GmbH
Albert Einstein Str. 2 B
77656 Offenburg
Germany
DYE Asia
No. 253, Guojhong Rd.
Dali City, Taichung County 412
Taiwan (R.O.C.)
RAIL
™
WARRANTY INFORMATION
WARRANTY AND LEGAL INFORMATION
W W W . P R O T O P A I N T B A L L . C O M
29
To Previous Page
Loading...
