Proton XQ30 - Calibration Mode Selection; Automatic (A) Calibration; Semi-Automatic (SA) Calibration

Calibration Mode
☐
Show device diagram
Calibration mode selection
There are three calibration modes: Manual, Semi-Automatic and Automatic.
1.
Press and hold the controller button (8) to enter the main menu.
2.
Rotate the controller ring (8) to select the Calibration Mode icon.
3.
Press the controller button (8)briefly to enter the submenu.
4.
Rotate the controller ring(8) to select one of the calibration modes described below.
5.
Press the controller button (8) briefly to confirm the selection.
Automatic (A). In this mode the firmware determines the need for calibration. The calibration
process starts automatically.
Semi-Automatic (SA). The user determines the need for calibration based on the image