Prozeda Solareg II BASIC HE - Table of Contents

2
Table of content
1 Application area/device features 3
1.1 Application area 3
1.2 Device features 3
2 Safety instructions 3
3 Mounting the device 4
3.1 Opening the device 4
3.2 Wall mounting 4
3.3 Connections 5
3.4 Temperature sensor connection 5
4 Short descriptions and device operation 5
4.1 Display layout 5
4.2 Operation 6
5 Menu structure 7
5.1 "Info" menu 7
5.2 "Programming" menu 7
5.3 "Manual Operation" menu 8
5.4 "System Settings" menu 8
6 System diagrams 9
7 Controller functions 10
7.1 General controller functions 10
7.1.1 RPM control 10
7.1.1.1 Standard 230 V AC pumps 10
230 V block modulation 10
7.1.1.2 HE pumps 10
Control of the solar circuit pump via analogue signal Type A 10
Control of the solar circuit pump via PWM signal 11
- Non-inverse PWM control 11
- Inverse PWM control 11
7.1.5 Drain-back function 12
7.2 Protective functions 13
7.2.1 Collector protection 13
7.2.2 Recooling (holiday function) 13
7.2.3 System protection 13
8 System monitoring 14
8.1 Sensor monitoring 14
8.2 Flow monitoring 14
9 Troubleshooting 15
9.1 Faults with error messages 15
9.2 Faults without error messages 16
10 SOLAREG II technical data 17
11 PT1000 resistance table 17
12 Guarantee terms and conditions 18
13 Declaration of conformity 18
Explanation of icons
Warning!
Icon indicates pos-
sibility of hazard
or error
Warning: 230 V AC
current!
Icon indicates
danger from high-
voltage, life-threat-
ening current.
List
Please note!
Operational advice
/ special informa-
tion
User action / pro-
cedure
Inspection / check