PRÜFTECHNIK VIBXPERT II - Page 21

VIBXPERT II - Short instructions - 04.2012
19
Operation: Measurement

Note
Start measurement.
• Meas.taskswiththesamesensor
are performed automatically one
after the other.
• Resultsaresavedautomatically,if
‘AutoSave’ is enabled (-> 2.4).
• ‘Routeisnished’appears,ifall
measurements have been com-
pleted.
2.1 Route view mode:
2.2 Show meas. locations in
tree view:
2.3 Skip element (consid-
ered to be completed):
2.4 AutoSave: