PRÜFTECHNIK VIBXPERT II - Route Measurement

VIBXPERT II - Short instructions - 04.2012
18
Route measurement
Operation: Measurement
Switch on VIBXPERT.
• seesection‘Basicfunctions’,p.12.
Start ‘Route’ mode.
Select route.
• Prerequisite:Routecontainsno VIB-
CODE location.
Select measurement
location.
• Changeview:treeorlist->2.1
• Nomeas.locationintreeviewvisible?
-> 2.2
• Skiprouteelement->2.3
Select measurement icon.
• Referencemeasurementmustbecar-
ried out first.
• Skiptask->2.3
• Connectingthesensor->1.3(p.17)