VIBXPERT II - Short instructions - 04.2012
4
Safety notes
Symbols used
Warning of operating errors that can lead to data loss or equip-
ment damage.
Information and tips on operating the data collector.
Intended use
- The measurement device may only be used for the measurement
of machine signals in industrial environments while taking into
consideration the technical specifications.
- Transducers and cables may be used only for their respective in-
tended uses as defined in the corresponding sales leaflets.
Any other use shall not be considered an intended use and is im-
permissible. Incorrect or impermissible use and failure to observe
the instructions in this manual result in a loss of warranty from
PRÜFTECHNIK.
Attention!
Note
Safety
To Next Page
Loading...
