PRÜFTECHNIK VIBXPERT II - Digital

VIBXPERT II - Short instructions - 04.2012
16
Off-route measurement (‘Multimode’)
Operation: Measurement
Switch on VIBXPERT.
• seesection‘Basicfunctions’,p.12.
Start ‘Multimode’.
Start measurement.
• Sensorconnectionischecked,if
sensor detection is enabled.
• GreenLEDisashingduringmeas:
Trigger OK.
• BlueLEDlightsupafterthemeas.:
Measuement OK.
• Livemode:KeeptheEnterkey
pressed when the measurement
starts.
• Repeatingthemeasurement->1.4
Open tab for overall, signal or
advanced measurements.
• Changingthemeas.task->1.1
• New/edittask->1.2
• Connectingthesensor->1.3
Select measurement icon.