PRÜFTECHNIK VIBXPERT II Short Instructions

VIBXPERT II - Short instructions - 04.2012
5
Safety
General safety notes
The following notes must be carefully read and completely under-
stood before the device is put into service.
• Duringmeasurementonmachineswithrotatingpartsexposed,
ensure that no brackets, cables etc. can become caught in rotat-
ing machine parts. Danger of injury!
• Themeasurementdevice may only be operated if it is undam-
aged, dry and clean.
• Operationandmaintenancearetobeperformedonlybyproperly
trained personnel.
• RepairstothedevicemaybecarriedoutonlybyaPRÜFTECHNIK-
authorized service technician.
• Onlyoriginalsparepartsandaccessoriesmaybeused.
• Onlyproperlyfunctioning,regularly-maintainedelectricalequip-
ment may be used. Any defects such as broken plugs or loose
sockets must be corrected immediately. Damaged cables must be
replaced by an authorized service technician.
• Anyalterationsthataffectdevicedesignoroperatingsafetyare
not permitted.
Environmental influences
• Portableradio-baseddevicescaninterferewithproperfunction-
ing of the device when operated nearby. In case of doubt, check
the connecting cable between the device and its transducer.
• Avoidexposingthedevice,itstransducersandcablestoenviron-
mental conditions that exceed the tolerances listed in the ‘Techni-
cal Data sheets’.
• Keeptheprotectivecapsontheconnectorsocketswhentheyare
not in use to keep them clean.

PRÜFTECHNIK VIBXPERT II Specifications

General

Brand	PRÜFTECHNIK
Model	VIBXPERT II
Category	Measuring Instruments
Language	English