PSC PowerScan Handheld Laser Scanner - Autosense Stand Mode

138 PowerScan
®
Scanner
AutoSense
®
Stand Mode
AutoSense
®
Stand Mode must be enabled when the scanner is used
with its stand accessory. This feature allows "hands-free" operation of
the scanner when placed in the stand.
Scan these bar codes to set the AutoSense
®
option.
1. Scan the SET bar code.
2. Scan the bar code to enabel/disable the option.
3. Scan the END bar code.
SET ------------------------------------------
Enable ---------
Disable ---------
END ------------------------------------------