PQube User Manual 2.1
Page 101 of 113
Synchronize your PQube’s time clock using SNTP
SNTP_Update_Interval_In_Hours=24
Setting up your Trends and Statistics
Typically, you choose “generated” if you are
measuring a load, like a building; and you choose
“avoided” if you are measuring a green source of
electricity like a wind turbine or photovoltaic array.
Solar_CO2_in_G_Per_KWh=0
Wind_CO2_in_G_Per_KWh=0
Coal_CO2_in_G_Per_KWh=970
Natural_Gas_CO2_in_G_Per_KWh=490
Hydro_CO2_in_G_Per_KWh=0
Diesel_CO2_in_G_Per_KWh=1050
Nuclear_CO2_in_G_Per_KWh=0
Custom_CO2_in_G_Per_KWh=930
These values are based roughly off EPA’s
measurements for typical California, USA values.
Expressed in grams of CO2 per kilowatt-hour
To Next Page
Loading...