PSL PQube - Page 91

PQube User Manual 2.1
Page 91 of 113
Setup.ini Tags
Comments
Valid Values
Example
[Neutral_Current_Events]
Neutral_Current_Events=OFF
Trigger events for current on the Neutral channel.
ON
OFF
Level_Threshold_In_Amps=AUTO
Level_Hysteresis_In_Amps=AUTO
Set the level threshold here. Your PQube will
record an event when the current exceeds this
level.
Inrush_Threshold_In_Amps=AUTO
Inrush_Threshold_In_Cycles=2
Set the inrush threshold here. Your PQube will
record an event when the current exceeds the
Inrush_Threshold_In_Amps value, for a period of
the Inrush_Threshold_In_Cycles or less.
[Earth_Current_Events]
Earth_Current_Events=OFF
Trigger Earth Current events.
ON
OFF
Level_Threshold_In_Amps=AUTO
Level_Hysteresis_In_Amps=AUTO
Set the level threshold here. Your PQube will
record an event when the current exceeds this
level.
Inrush_Threshold_In_Amps=AUTO
Inrush_Threshold_In_Cycles=2
Set the inrush threshold here. Your PQube will
record an event when the current exceeds the
Inrush_Threshold_In_Amps value, for a period of
the Inrush_Threshold_In_Cycles or less.