PSL PQube - Page 93

PQube User Manual 2.1
Page 93 of 113
[Waveshape_Change_Events]
Waveshape_Change_Events=ON
Trigger a Waveshape Change when the voltage
waveform changes abruptly. This is useful for
detecting power factor correction capacitor
switching.
ON
OFF
Voltage_Threshold_In_Percent_Of_Nominal=20.00
Duration_Threshold_In_Percent_Of_Cycle=10.00
If the voltage change from one cycle to the next
exceeds the selected threshold, for the selected
duration or longer, a Waveshape Change will be
triggered.
[External_Probe_Events]
Probe_1_Overtemperature_Events=ON
Probe_1_Undertemperature_Events=OFF
Probe_1_Undertemperature_Threshold_in_Deg_C=0
Probe_1_Overtemperature_Threshold_in_Deg_C=60
Probe_1_Temperature_Event_Hysteresis_in_Deg_C=2
Probe_1_High_Humidity_Events=OFF
Probe_1_Low_Humidity_Events=OFF
Probe_1_Low_Humidity_Threshold_in_Percent_RH=0
Probe_1_High_Humidity_Threshold_in_Percent_RH=1
00
Probe_1_Humidity_Event_Hysteresis_in_Percent_RH=
2
Probe_2_Overtemperature_Events=OFF
Probe_2_Undertemperature_Events=OFF
Probe_2_Undertemperature_Threshold_in_Deg_C=0
Probe_2_Overtemperature_Threshold_in_Deg_C=50
Probe_2_Temperature_Event_Hysteresis_in_Deg_C=2
Show pop ups, recent event screens, and event depth
duration based on temperature/humidity thresholds
from either channel.