PSL PQube - Page 97

PQube User Manual 2.1
Page 97 of 113
SMTP_Auth_Method=AUTO
AUTO
NONE
PLAIN
LOGIN
DIGEST-MD5
CRAM-MD5
Setup.ini Tags
Comments
Valid Values
Example
[Incoming_Email]
Incoming_Email=OFF
Allow your PQube to receive incoming email.
ON
OFF
Check_Every_N_Minutes=10
Set how often your PQube will check for incoming
mail.
[Incoming_Email_Filter]
Subject_Must_Begin_With=PQube
Your PQube will only accept incoming emails when
the Subject begins with this keyword. This is
another layer of security for your PQube.
Subject: PQube Firmware
Update
Subject: PQube Send Logs
Subject: PQube Reset
PQube
Email_Must_Be_From_1=
Email_Must_Be_From_2=
Email_Must_Be_From_3=
Email_Must_Be_From_4=
Email_Must_Be_From_5=
If this list is left blank, then your PQube will accept
emails from anyone.
If any email addresses are added to this list, then
your PQube will only accept emails from recipients
on this list.
[Outgoing_Email]
Enable_Event_Summary_Email=OFF
Summary emails are short, plain-text notifications
with Event Type, Magnitude, Duration, Trigger
Date, Trigger Time, Channel, and Threshold.
ON
OFF