Pulsafeeder PULSAR 55HL User Manual

2
2.2 COMPONENT LOCATION AND OPERATION
Figure 2
2.2.1 Reagent Head Assembly
The typical reagent head assembly consists of reagent
head, diaphragm, and suction and discharge check
valves. This assembly is the only part of the pump to
contact the process liquid; consequently, maintenance
is critical to pump performance.
Figure 3

Pulsafeeder PULSAR 55HL Specifications

General

Brand	Pulsafeeder
Model	PULSAR 55HL
Category	Water Pump
Language	English