Pulsar KRYPTON 2 - Page 2

Wireless Remote Control
Descriptions of Controls
Remote Control Activation
USB Connection
Software
Stream Vision 2
Firmware Update
Maintenance
Technical Inspection
Technical Maintenance and Storage
Troubleshooting
The device does not turn on
Device malfunction
The device does not operate from an external power source
Blurred image with vertical stripes or an uneven background
Poor quality image . There is noise or ghost images of previous scenes or objects
Black screen after calibration
When the device is turned on , the calibration frequency is at first higher , then
decreases ( if the automatic calibration mode is enabled )
Image is too dark
Color bars appear on the display or the image disappears
The image of the object being observed is missing
The point of impact shifts after firing rounds
Poor image quality / Reduced detection distance
Smartphone or tablet cannot be connected to the device
Missing or interrupted broadcasting via Wi - Fi
When the device is used in low temperature conditions the image quality is worse than
in positive temperatures .
Residual horizontal lines and traces of horizontally placed objects during observation
process .
Remote control does not work
Status bar not visible
Legal Compliances and Disclaimers