Operating voltage and frequency requirement of all electrical equipment should be checked prior to plugging them into this
generator. Damage may result if the equipment is not designed to operate within a +/- 10% voltage variation, and +/- 3 Hz
frequency variation from the generator name plate ratings. To reduce the risk of damage, always have an additional load
plugged into the generator if solid-state equipment (such as television set) is used. A power line conditioner is
recommended for some solid-state applications.
Wattage Reference Guide
(Wattages listed are just approximations. Check electronic device for actual wattage)
Never exceed generator’s wattage / amperage capacity. This could damage the generator
and / or connected electrical devices.
•
Check operating voltage and frequency requirements of all electrical devices prior to plugging in to the generator.
Personal Computer (17” Monitor)
1000W Quartz Halogen Work Light
Electric Drill (½ HP, 5.4 Amps)
Garage Door Opener (⅓ HP)
18 CU Ft Refrigerator / Freezer
Electric Range (1 element)
To Next Page
Loading...
Need help?
General
