Unpacking
1.
Place box on a level surface.
2.
Remove all items from box except the generator. Make sure all items listed on the packing list are included and
undamaged
3.
Cut-down the sides of the box being careful to avoid touching the generator.
4.
Leave generator on box to install wheel assemblies.
Packing List
Check all loose parts to the following list. Contact your dealer if any loose parts are not included.
Description Qty
Handle
Screw
Nut
1
4
4
Wheels
2
Hair pin
2
Axles
2
Description Qty
Generator
1
Operator’s manual
1
Toolkit
Spark Plug Wrench
1
1
Washer
2
Description Qty
Supporting Leg
Screw(M6)
Nut(M6)
2
4
4
Funnel
+ +
+
+ ++ +
( )
++ +
+
Handle Assembly Wheel Assembly
Foot Assembly
+
+
+
Handle Bracket 1
1Handle Clip
Two stage regulator
1
To Next Page
Loading...
