Puratech 5100 - Water Conditioner Specifications

PuraTech
®
Owner’s Manual 12/11/2013 31
Water Conditioner Specifications
Model 5100
Max Compensated Hardness gpg (g/L)
90 (1.5)
Maximum ferrous iron reduction
1
10 ppm
Minimum pH (standard units)
7
Media type and amounts
Self Cleaning Filter Media.
Super Fine Mesh Resin Total–1 cu. ft. (28 L)
#1 Setting—Salt
2
lb/grains (kg/g) removed
1/5,500 (0.5/356)
#2 Setting—Salt
2
lb/grains (kg/g) removed
3/13,700 (1.4/887)
#3 Setting—Salt
2
lb/grains (kg/g) removed
6/23,700 (2.7/1535)
#4 Setting—Salt
2
lb/grains (kg/g) removed
9/30,800 (4.1/1995)
#1 Salt Setting—Total length of reg. Min/gal
25/20
#2 Salt Setting—Total length of reg. Min/gal
27.5/21
#3 Salt Setting—Total length of reg. Min/gal
31.5/23
#4 Salt Setting—Total length of reg. Min/gal
35.5/25
Minimum / Maximum water and ambient temperature–
o
F (
o
C)
40/120 (4/49)
Mineral tank size–in. (cm)
10.5 I.D. x 26 (26.7 I.D. x 66)
Peak flow rate
8.2 gpm (31 L/min)
Pressure drop at service flow rate of 8 gpm (30.3 L/min)–psi (bar)
14.6 (1.0)
Maximum flow rate to drain during regeneration–backwash gpm (L/min)
2.4 (9.1)
Maximum flow rate to drain during regeneration–backwash gpm (L/min)
(Models 51PTB1 and 51PTP1 only)
3.0 (11.4)
Water Pressure (min–max psi) (bar)
20–120 (1.4/8.3)
Minimum water flow required–gpm (L/min)
2.4 (9.1)
Minimum water flow required–gpm (L/min) (Models 51PTB1 and 51PTP1 only)
3.0 (11.4)
Maximum chlorine (ppm)
0.0
Controller type
5 Button
Frequency of regeneration
Demand
Salt storage–lb (kg)
170 (77.1)
Height–in. (cm)
30.5 (77.5)
Footprint–in. (cm)
15 x 26 (38 x 66)
Electrical rating
12 VAC, 50/60 Hz, 0.015kW-hr
Plumbing connections
1" male (MNPT)
Shipping weight—approximate–lb (kg)
105 (48)
1
The state of Wisconsin limits iron reduction claims to 5 ppm.
2
Use clean white pellet salt, cube-style salt, or solar salt.