9
EN
Connecting to the internet
Using your wireless network
1. Press Home and select The Lounge from the
audio source screen. One Flow will scan for
wireless networks and show them in a list.
2. Select your network. If your network requires a key,
follow steps 3-4.
3. Enter your network key or password by turning
and pressing the Select dial to highlight and select
characters. Select sp to insert a space. Press
More... for lower-case; press it again for symbols.
Press Delete to remove the last character.
4. Press Save to finish. One Flow will connect to your
network.
Helpful hint: Your Wi-Fi key is case sensitive, make
sure you enter it correctly.
Using an Ethernet adapter
You can also connect One Flow to the internet using
the optional Pure Mini USB Ethernet adapter.
To use the Pure Mini USB Ethernet adapter, connect
your network cable to the adapter, then connect the
adapter to the mini USB socket on your One Flow. You
will then need to select the Ethernet network option
(see page 22). The adapter USB light comes on and
a connection to your network is made automatically.
The Ethernet connection status is shown on screen
(see page 7).
Note: Ethernet connection is only possible when mains
power is connected.
ABC DEFGHIJKLM
NOPQRSTUVWXYZ
sp0123456789
Enter key or password
Delete Save More...
6578616D706C
LAN
USB
100Mbps
LAN
USB
OneFlow_US.indb 9 5/25/2012 5:38:22 PM
To Next Page
Loading...
Need help?
General
Weight and Dimensions
