Purelogic HYD-2300

HYD-2100. CNC Plasma&Flame Cutting Control System
Edition of 28.07.2015
28
www.purelogic.ru8 (800) 555 63 74
F1 DiskFile F2 UDisk F3 Search
F4
EditFile
F5 DelFile
F6
CopyToDisk
F7
Preview
F8 OK
1: SHAPELIB/SHAPE_18.TXT
2: SHAPELIB/SHAPE_00.TXT
3: SHAPELIB/SHAPE_01.TXT
4: SHAPELIB/SHAPE_43.TXT
5: SHAPELIB/SHAPE_.TXT
6: SHAPELIB/UsedPart.abs
7: SHAPELIB/UsedNoKf.abs
File name:
\SHAPE_43.TXT
F1 DiskFile F2 UDisk F3 Search
F4
EditFile
F5 DelFile
F6
CopyToDisk
F7
Preview
F8 OK
1: SHAPELIB/SHAPE_18.TXT
2: SHAPELIB/SHAPE_00.TXT
3: SHAPELIB/SHAPE_01.TXT
4: SHAPELIB/SHAPE_43.TXT
5: SHAPELIB/SHAPE_.TXT
6: SHAPELIB/UsedPart.abs
7: SHAPELIB/UsedNoKf.abs
File name:
\SHAPE_43.TXT
F1 DiskFile F2 UDisk F3 Search
F4
EditFile
F5 DelFile
F6
CopyToDisk
F7
Preview
F8 OK
1: SHAPELIB/SHAPE_18.TXT
2: SHAPELIB/SHAPE_00.TXT
3: SHAPELIB/SHAPE_01.TXT
4: SHAPELIB/SHAPE_43.TXT
5: SHAPELIB/SHAPE_.TXT
6: SHAPELIB/UsedPart.abs
7: SHAPELIB/UsedNoKf.abs
File exist, confirm to cover?
ENTER: confirm / ESC: cancel
F1 DiskFile F2 UDisk F3 Search
F4
EditFile
F5 DelFile
F6
CopyToDisk
F7
Preview
F8 OK
1: SHAPELIB/SHAPE_18.TXT
2: SHAPELIB/SHAPE_00.TXT
3: SHAPELIB/SHAPE_01.TXT
4: SHAPELIB/SHAPE_43.TXT
5: SHAPELIB/SHAPE_.TXT
6: SHAPELIB/UsedPart.abs
7: SHAPELIB/UsedNoKf.abs
File exist, confirm to cover?
ENTER: confirm / ESC: cancel
Figure 35. Save U disk files Figure 36. Replacement documents
When input file name, if you do not want to change the file name, you can be directly press [Enter] to preserved; or modify the file name and then press
[Enter] to save. If the same named file has already exited, the system prompts (Fig. 36).
If you want to replace the internal documents, press [Enter] key, if you want to change the file name, press [Esc], change the file name and then save.