Movement control upgrade
After entering BIOS, press F2 to upgrade the welcome interface completely, it should satisfy the following conditions:
• Flash Disk is connected to the system.
• There should be the MOTION.DSP upgrade file in the root folder of the flash disk.
Pressed F3 to upgrade when the conditions are satisfied, when completing the upgrading, press F6 to reboot.
Movement Backup
After entering BIOS, press F4 to backup.
System Reset
After entering BIOS, press F5 to return to the original system that has been backup.
13
G, M code rapid consult
Order Function
G90
G42
Absolute coordinate system
Right kerf gap compensation
G92
G21
G00
Reference coordinate
Metric unit
Quickly move
G99 Rotation, proportion, mirror image
G20
G40
English unit
Cancel kerf gap compensation
G91
G41
G01
Relative coordinate system
Left kerf gap compensation
Liner cutting
1
5
9
3
7
11
Serial number
4
8
2
6
10
To Next Page
Loading...