PURONICS iGen - iGen Front Cover and Drive Assembly; Battery Replacement

Page 4 iGen
®
Man u al
iGen
®
Front Cover and Drive Assembly
Drawing No. Order No. Description Quantity
1 V4165-01 WS1 iGen® FRONT COVER ASY 1
2 V3107-01 WS1 MOTOR 1
3 V3106-01 WS1 DRIVE BRACKET&SPRING CLIP 1
4 V4164PU-BOARD WS1 iGen® PCB REPLACE 1
5 V3110 WS1 DRIVE REDUCING GEAR 12X36 3
6 V3109 WS1 DRIVE GEAR COVER 1
7 V4166 WS1 iGen® BACK PLATE
1
8 V4169 WS1 iGen® WEATHER COVER
1
Not Shown V3186 WS1 AC ADAPTER 120V-12V
1
Battery Fully Seated
When replacing the battery, align
positives and push down to fully seat.
Correct
Battery
Orientation
Battery replacement is
3 volt lithium coin cell
type 2032.
AC Adapter U.S.
Supply Voltage 120 V AC
Supply Frequency 60 Hz
Output Voltage 12 V AC
Output Current 500 mA
8
1
4
7
6
5
2
3