Pyle PD3000BA - Connecting to Amplifier Equipment; Basic Playback; Initiating Playback

www.PyleUSA.com
15
Connecting to an Amplier Equipment
BASIC PLAYBACK
Preparations
• When you want to view a disc, turn on the TV and select the video input
connected to the unit
Basic Playback
1. Press POWER switch in the front panel to ON, the unit turns on and the TV screen
will display the start logo. If a disc is already in the tray, it will begin to play once
the power is ON.
2. Press OPEN/CLOSE to open the disc tray, place a disc on the disc tray.
• There are two dierent disc sizes. Place the disc In the correct guide on the
disc tray. If the disc is out of the guide, it may damage the disc and cause the
unit to malfunction.
• Do not place disc which is unplayable in this unit.
3. Press OPEN/CLOSE to close the disc tray, the playback will automatically start.
• Some disc may not playback automatically, you can press PLAY button to
start playback.
4. Some disc may start playback with a menu, use the cursor button on the remote
controller to select menu options and press PLAY to start, or press digits to select
a menu options directly.