www.PyleUSA.com
18
NOTES:
The machine will store the radio station into current channel number when the
machine receives one. The eect is much related to the intensity of the signal. If
there are no signal or immethodical signal, you'd better choose manual scan or
frequency selection scan.
• FREQUENCY SELECTION SCAN
Press [TIME] key on the remote control, the display shows the status. Then you
can input the frequency of the radio station you want to listen to.
A. FM frequency range: 87.5-108.0MHz
B. AM frequency range: 530-1620KHz
• CHANNEL SELECT
Press [ /Ch] and [ /CH+] key on the remote control or on the panel, then you
can select the channel you have already stored.
NOTES:
You can store your favorite radio stations in continuous channels.
• MONOPHONY/STEREO MODE SELECT
Press [L/R] key on the remote control to select monophony or stereo mode to
listen to the radio.
NOTES:
We advise you to select monophony mode when the signal of the radio station
you've chosen is not good enough.
To Next Page
Loading...
Need help?
General
