Figure 4.9
3.1.2 Set Multi-Device for WAN
If you want to view cameras from the internet, you have to add these devices by DDNS domain name.
Make sure all these cameras you want to add have DDNS set successfully. (See 3.7 DDNS Service Settings)
Login to the first camera by DDNS domain name and port, this camera will be as the host camera.
Figure 5.0
Click Multi-Device, select Multi-Device Settings. Choose the 2nd Device; fill in the 2nd camera’s Alias, Host,
Http Port, User, Password, click Add. Set more devices in the same way, after all done, click Submit.
NOTE: The Alias is optional; you can set the alias as you wish. The Host must be the camera’s DDNS domain
name, and without “http://”, it’s not the LAN IP address. If you have several cameras, you can use the same
To Next Page
Loading...
Need help?
General