Pyle PLDN79U - ELECTRICAL CONNECTION

6
ELECTRICAL CONNECTION
Attention:
1. Please make sure “B+”and ”ACC” pin location are correct before making connection
These two pins may be different in different cars, wrong connections of these two pins
will burn the fuse outside.
2.” Parking ”wire must be connected to “ground” in order to active the video function
3. This player can only be used by the 12V DC cathode grounding electrical system.
4. Don’
t connect the terminals of the car battery until the player is absolutely with well erection
joint.
5. Please make sure to connect the yellow wire to the positive of the battery(+).
6. When change the fuse. Please make sure the specifications are same.
7. Using good quality speaker with 4-8 ohm can result in the best effect of the equipment.