EasyManuals Logo

Pyronix Enforcer 32-W User Manual

Pyronix Enforcer 32-W
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background image
User Manual
Page: 8
5. Setting The System
5.1 Using a PIN Code or Tag
Enter a valid PIN code or present a valid
tag to the symbol as shown.
Enter the area you wish to set, and press
I. ‘Please wait setting wireless’ will be
displayed.
There are three different setting
methods your installer will instruct you
through:
Final Door: Leave the building and
make sure the exit door is closed
properly.
Timed: Make sure you leave the building
before the timer shown on the keypad
expires.
Push to set: Press the push to set
button installed by your engineer to set
the system.
5.2 Using the Wireless KEyfob (KF4-WE)
To set via a keyfob. Pressand hold for more
than 2 seconds.
The keyfob LED will start to flash GREEN
indicating that the system is starting to set.
Please wait setting wireless’ will be displayed
on the keypad and the programmed area will
begin to set.
To ‘quick set’, press and hold the
key a second
time for 4 seconds.
Once set, the keyfob LED will illuminate RED
indicating that the system is now set.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Pyronix Enforcer 32-W and is the answer not in the manual?

Pyronix Enforcer 32-W Specifications

General IconGeneral
BrandPyronix
ModelEnforcer 32-W
CategorySecurity System
LanguageEnglish

Related product manuals