User Manual
Page: 9
6. Unsetting The System
6.1 Using a PIN Code or Tag
Enter the building, the 'entry time' will
start.
Enter a valid PIN code or present a valid
tag to the symbol as shown.
The area that the code is assigned to will
be unset.
NOTE: If ‘flexi-set’ is disabled (see page
18) then the system will automatically
Unset that level set once a valid user
code or tag is presented.
6.2 Using a Wireless Keyfob (KF4-WE)
To unset via a keyfob. Press .
The keyfob LED will start to flash GREEN
indicating that the system has unset.
NOTE: Unsetting with a keyfob will only be
allowed if your engineer has enabled this.
To Next Page
Loading...
