Edit Users
The ‘EDIT USERS’ function allows adding, editing and deleting of both master manager and
user codes, tags and keyfobs.
The control panel can have up to 80 users programmed. Each of the users are allocated a
code, tag or a wireless keyfob.
Please note: A maximum of 32 users can have a wireless keyfob allocated.
Flexi-set
Flexi-set allows you to choose which level/area to set if a user code or tag is assigned to one
or more levels/areas. If this function is disabled, when a user code is entered or proximity
tag presented, the system will automatically set the levels/areas that the user is assigned to.
Please note: Any proximity tags that are to be used on a standalone tag reader must have exi-set set to
‘No’.
Adding a New User
Press b or h to scroll to ‘EDIT USERS?’.
Press f.
EDIT USER?
To add a new code, tag, or keyfob press f. Press
A to delete or change a user code (see further down
for details).
Add New User?
Press [ or ] to choose a user number. Press
f.
Empty [01]
Enter the new code, present a tag or press and hold
a keyfob button until the display changes. Once
‘asterisks’ appear, the tag or user code will be now
assigned to this user. Press f.
Enter User Code
[******]
Please note: The next three options will only appear if you are adding a wireless keyfob.
If a keyfob is programmed, the 'User Name' will be
displayed on the keypad.
Enter the user name. Press f.
User Name
_
Press [ or ] to choose the button to program.
Press f.
Select Button
Lock [1]
To Next Page
Loading...
Need help?
General
