14
EURO 76 User Guide
MASTER MANAGER MENU
Menu Features Overview
The Master Manager Menu has the following functions:
Please note: The options visible will depend on which modem is installed in the panel.
FUNCTION DESCRIPTION
SET DATE AND TIME Programs the date and time.
OPERATE USER OUTPUTS
Activates/deactivates user automation outputs that are used to
remotely activate devices, such as electronic gates & lights.
OMIT INPUTS Omits any ‘24 hour’ zones only (except ‘Hold Up’ zones).
EDIT USERS Adds/Edits/Deletes User PIN codes, tags and key fobs.
REVIEW LOGS Displays all event log information.
SMS PHONEBOOK
If SMS text is enabled, there will be up to 10 mobile numbers
that can be programmed to send SMS alarms. Please discuss
this feature with your engineer if required (THIRD PARTY SIM
CARDS ONLY).
SET UP APP DATA
If the HomeControl2.0 App has been enabled, this function will
control the settings.
MODULE SETUP
This option will change depending on which modem is installed
in the system. It could display:
‘WI FI SETUP’, ‘GPRS SETUP’ or ‘LAN SETUP.’
WALK TEST Tests each zone.
SIREN TEST Tests each external siren (wired or wireless).
DIAL OUT MENU Calls the UDL software.
ALLOW ENGINEER MENU Enables or Disables engineer access.
BLOCK UDL SET Blocks remote setting from the PC software.
BLOCK UDL Blocks uploading/downloading from the PC software.
SYSTEM SOUNDS DEMO Demonstrates all the sounds of the alarm system.
EXIT MANAGER MODE Exits the Master Manager Menu.
Please note: The Master Manager code allows access to all the options above. A ‘user
code’ has access to the ‘User Menu’ which includes the functions: ‘OPERATE USER OUTPUTS’,
‘CHANGE CODE’, ‘REVIEW LOGS’, ‘WALK TEST’, ‘SIREN TEST’, ‘ALLOW ENGINEER MENU’,
and ‘EXIT USER MENU’.
To Next Page
Loading...
